BMW iX Owner's Manual page 160

CONTROLS
Switching pathway lighting on
▷ After switching off the drive-ready state,
briefly push the turn signal lever forward.
▷ Press and hold the button on the
vehicle key for approx. 1 second.
Setting the duration
1. "MENU"
2. "Vehicle apps"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. "Pathway lighting"
6. Select the desired setting.
Daytime driving lights
General information
The daytime driving lights light up when drive-
ready state is switched on.
Activating/deactivating daytime
driving lights
In some countries, daytime driving lights are
mandatory, so it may not be possible to deacti-
vate the daytime driving lights in front.
1. "MENU"
2. "Vehicle apps"
3. "Exterior lighting"
4. If necessary, "Additional settings"
5. Depending on vehicle equipment or na-
tional-market version:
▷ "Daytime driving lights"
▷ "Rear daytime driving lights"
160
Lights
Online Edition for Part no. 01405A6B2E9 - X/22
Adaptive lighting functions
Principle
Adaptive lighting functions enable dynamic il-
lumination of the road.
General information
The adaptive lighting functions may consist of
one system or multiple systems, depending on
the equipment version:
▷ Adaptive Light Control.
▷ Cornering light.
Activating the adaptive lighting
functions
Press the button on the light switch.
The LED in the button lights up.
The adaptive lighting functions are active
when the drive-ready state is switched on.
Adaptive Light Control
General information
Depending on the steering-wheel angle and
other parameters, the laser high beams follow
the course of the road.
Cornering light
Principle
In tight curves, for instance on mountainous
roads or when turning, an additional cornering
light is switched on that lights up the inside of
the curve when the vehicle is moving below a
certain speed.