BMW iX Owner's Manual page 147

Power gauge
Principle
The power gauge indicates the current electric
drive power as a percentage.
Display
Needle in the area of arrow 1: display of the
energy recovered by coasting or when deceler-
ating.
Needle near arrow 2: Drive power in percent.
Energy recovery display
Icon Meaning
Low energy recovery.
Selector lever position D is en-
gaged.
Average energy recovery.
Selector lever position D is en-
gaged.
High energy recovery.
Selector lever position D or B is
set.
Adaptive recuperation is acti-
vated
Adaptive recuperation, refer to
page 298.
The degree of the energy recovery depends on
the settings for the energy recovery.
Online Edition for Part no. 01405A6B2E9 - X/22
Displays
Additional information:
Driving in detail: eDRIVE, refer to page 123.
Reduced drive power
The available power may be reduced due to
certain factors. The power gauge is automati-
cally adjusted accordingly.
In addition, the icons on the power gauge indi-
cate reduced drive power:
Icon Description
Blue icon: cold drivetrain.
White icon: increased drive sys-
tem temperature, for instance
due to sustained or high
power demand when driving
on mountain roads.
Depending on vehicle equip-
ment and national-market ver-
sion:
Drive power limitation defined
via the BMW Digital Key.
Heavily discharged high-volt-
age battery.
System-related functional limi-
tation.
A Check Control message is
displayed in addition where ap-
plicable.
Standby state and drive-
ready state
The word OFF in the instru-
ment cluster indicates that
drive-ready state is switched off
and standby state is switched
on.
CONTROLS
147