BMW iX Owner's Manual page 173

Hide thumbs Also See for iX:
Table of Contents

Advertisement

Icon
Meaning
Depending on vehicle equipment and
national-market version:
Icon illuminates yellow: function re-
striction detected, e.g., due to system
limits of the cameras or because the
system has malfunctioned. You may
continue driving. If necessary, follow
the instructions from Check Control
messages.
System limits of the cameras, refer to
page 37.
Depending on vehicle equipment and
national-market version:
Icon illuminates gray: the system is
turned off.
Risk of collision, for instance with a
person.
Risk of collision, for instance with an
oncoming or a vehicle driving ahead.
Risk of collision, e.g., with a vehicle
crossing from the right.
Risk of collision, e.g., with a vehicle
crossing from the left.
General risk of collision.
The image of the respective icon may vary be-
cause the system may detect multiple objects.
Warning function
The Forward Collision Mitigation warns on dif-
ferent warning levels, depending on the re-
spective hazardous situation.
In the event of a system warning, the driver
must intervene immediately and in accordance
with the situation.
A red icon lights up:
Online Edition for Part no. 01405A6B2E9 - X/22
Safety
A hazardous situation has been detected.
Increased awareness is required.
A red icon flashes:
There is a risk of collision. Intervene imme-
diately.
A warning signal sounds:
There is a risk of collision. Intervene imme-
diately.
Automatic brake intervention:
Depending on the equipment and situation
in case of an imminent danger of collision,
the system can also intervene with an auto-
matic brake intervention and automatically
decelerate the vehicle, if necessary, to a
complete stop.
When the brake pedal is depressed quickly and
hard, the maximum braking force of the vehicle
is used.
Automatic brake intervention
In case of a risk of collision, the system can
assist with an automatic brake intervention, if
necessary.
When the vehicle is traveling at a low speed,
the vehicle may come to a complete stop.
A brake intervention can be canceled by step-
ping on the accelerator pedal with sufficient
force, releasing the brake pedal, or by actively
steering.
Depending on the equipment and situation,
the brake intervention can occur up to approx.
155 mph/250 km/h.
At speeds above approx. 130 mph/210 km/h,
only a brief brake intervention will occur.
CONTROLS
173

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents