Mitsubishi Electric FR-E8AXY E KIT Instruction Manual page 3

 Additional Instructions
The following instructions must be also followed. If the product is handled incorrectly, it may cause unexpected fault, an injury, or an electric shock.
CAUTION
Transportation and installation
 Do not install or operate the plug-in option if it is damaged or has parts missing.
 Do not stand or rest heavy objects on the product.
 Ensure the mounting orientation of this product is correct.
 Foreign conductive objects must be prevented from entering the inverter. That includes screws and metal fragments or other flammable
substance such as oil.
 If halogens (including fluorine, chlorine, bromine, and iodine) contained in fumigants for wood packages enter this product, the product may
be damaged. Prevent the entry of fumigant residuals or use an alternative method such as heat disinfection. Note that sterilization or
disinfection of wood packages should be performed before packing the product.
Trial run
 Before starting operation, each parameter must be confirmed and adjusted. A failure to do so may cause some machines to make
unexpected motions.
WARNING
Usage
 Do not modify the equipment.
 Do not remove any part which is not instructed to be removed in the Instruction Manuals. Doing so may lead to failure or damage of the
product.
CAUTION
Usage
 As all parameters return to their initial values after the Parameter clear or All parameter clear is performed, the parameters must be set again
as required before the operation is started.
 Static electricity in your body must be discharged before you touch the product.
Maintenance, inspection and parts replacement
 Do not carry out a megger (insulation resistance) test.
Disposal
 This product must be treated as industrial waste.
General instruction
 For clarity, illustrations in this Instruction Manual may be drawn with covers or safety guards removed. Ensure all covers and safety guards
are properly installed prior to starting operation.
2