Mitsubishi Electric FR-E8AXY E KIT Instruction Manual page 19

Table of Contents

Advertisement

NOTE
• When the junction connector is installed to the plug-in option, the option is fixed with the hooks of the connector. The
junction connector cannot be removed from the plug-in option.
• When removing the front cover for plug-in option from the inverter, note that the recessed neck screw cannot be removed
from the front cover for plug-in option.
• When installing/removing the plug-in option, hold the sides of the option. Do not press on the parts on the option circuit
board. Stress applied to the parts by pressing, etc. may cause a failure.
• Be careful not to drop mounting screws during the installation or removal of the plug-in option.
• When the inverter cannot recognize the option due to improper installation or any other reason, the protective function (E.1)
is activated and the inverter cannot be operated. All the outputs are shut off when E.1 is activated.
Mounted position
Option connector
• When removing the plug-in option, remove the two screws on either side, and then pull it straight out. Pressure applied to
the option connector and to the option board may break the option.
18
INSTALLATION
Fault indication

Advertisement

Table of Contents
loading

Table of Contents