Advertisement
Product overview
8 | Set 880
Overview of the Transmitter status LED
Transmitter status LED The transmitter...
–
lights up white
lights up blue
flashes blue and white
The LEDs on the transmitter indicate the current operating
state. If you are not pressing any button on the stethoset
receiver or the transmitter, the LEDs automatically dim
after approx. 30 seconds to not disturb you.
Overview of the acoustic signals/beeps
Beeps
during operation,
2 beeps
during operation, no
audio transmission,
5 beeps
when changing the
volume
when changing the
balance setting
... is in standby mode.
... and the stethoset receiver are
connected. The speech
intelligibility function is
deactivated (see page 28).
... and the stethoset receiver are
connected. The speech
intelligibility function is activated
(see page 28).
... has detected an incompatible
digital audio signal (see page 11).
Meaning
The rechargeable battery is almost
empty, recharge the rechargeable
battery (see page 15).
The receiver is outside the trans-
mission range (see page 45).
The maximum or minimum volume
is reached (see page 23).
The maximum or minimum balance
setting is reached (see page 24).
Advertisement
