Advertisement
Charging the rechargeable battery using the
MCA 800 charging adapter
If you have purchased an additional stethoset receiver and/or
an optional MCA 800 charging adapter, you can also charge
the stethoset receiver using the charging adapter.
WARNING
Interference due to magnetic fields!
The MCA 800 charging adapter generates stronger permanent
magnetic fields that could cause interference with cardiac
pacemakers, implanted defibrillators (ICDs) and other
implants.
b
Do not use the MCA 800 charging adapter if you are wearing
a cardiac pacemaker, implanted defibrillator or other
implant.
1
Select a suitable country adapter and slide it onto the
power supply unit until it clicks audibly into place.
2
Connect the connector of the power supply unit to the con-
nection socket of the MCA 800 charging adapter.
3
Plug the power supply unit into the wall socket.
4
Connect the charging adapter to the charging contacts on
the stethoset receiver. The charging adapter is magneti-
cally oriented to the correct position.
The rechargeable battery is being charged. The LED on the
charging adapter lights up red. When the rechargeable bat-
tery is fully charged, the LED lights up green.
1
US
EU
UK
AU
3
4
You can also use the stethoset receiver during charging.
Please note, however, that the receiver can get slightly
warm during charging. The charge status of the
rechargeable battery is displayed on the transmitter (see
page 15).
Using additional functions
2
Set 880 | 41
3 h
100 %
Advertisement
