Advertisement
Selecting a hearing profile
To select the hearing profile that best suits you, proceed as fol-
lows:
1
Switch your audio source on
and select a program where
speech is foregrounded.
2
Put the stethoset receiver on
and make sure that only this
receiver is connected to the
transmitter.
Otherwise,
hearing profile cannot be
adjusted.
3
Use the
L
and
R
the transmitter to adjust the
balance (see page 24). This
ensures that each subse-
quently
selected
profile is perfectly matched
to your left/right balance
setting.
4
Press the
Hearing profile
button
on the transmitter
for 2 seconds to select the
next hearing profile.
Press the button again for
2 seconds to switch to the
next hearing profile.
5
Test which of the hearing
profiles (1, 2, 3, 4 or 5) gives
you the best sound quality
and helps you to hear best.
Your individual hearing pro-
file is adjusted and saved on
the stethoset receiver.
Since your level of hearing impairment may change over
time, we recommend that you repeat the selection of the
hearing profile from time to time.
If you switch to the next hearing profile, the speech intel-
ligibility function is automatically deactivated so that you
can hear the hearing profile unchanged (see page 28).
To prevent accidental adjustment of the hearing profile
settings, you can activate the settings protection func-
tion (see page 38).
a
2...4
buttons on
hearing
2s
Using the Set 880
ON
Set 880 | 27
Advertisement
