Advertisement
Using the charging reminder function
When the stethoset receiver is switched off and the transmit-
ter
automatically
Battery
LED
will flash back and forth for 10 minutes to
remind you to charge the stethoset receiver.
b
Charge the stethoset receiver by placing it into the trans-
mitter's charging compartment (see page 15).
The LED stops flashing and the charging process starts.
You can also switch off the charging reminder function
(see page 37).
Putting the Set 880 into operation
switches
off
(standby
mode),
the
Set 880 | 17
Advertisement
