Advertisement
Using additional functions
38 | Set 880
b
Save the setting by disconnecting the transmitter from the
power supply system (see page 36).
Settings protection function
The settings protection function prevents accidental adjust-
ment of the hearing profile and the balance setting (this pro-
tection function is saved on the stethoset receiver). Switching
between stereo and mono operation on the transmitter is no
longer possible (this protection function is saved on the trans-
mitter).
b
Make sure that your stethoset receiver's balance setting
and hearing profile are correctly adjusted (see page 24 and
25) and that the transmitter is set to stereo or mono opera-
tion as desired (see page 34).
b
Make sure that the protected settings mode is activated
(see page 36).
b
Place the stethoset receiver into the transmitter's charging
compartment.
b
Press the volume button
vate the settings protection function.
Status and display of
the settings protection
function
activated
rd
3
LED segment lit
deactivated*
rd
3
LED segment off
b
Save the setting by disconnecting the transmitter from the
power supply system (see page 36).
+
on the stethoset receiver to acti-
Function/behavior
The activated hearing profile and
the balance setting for the
stethoset receiver cannot be
changed/deactivated. Switching
between stereo and mono
operation on the transmitter is not
possible.
The hearing profiles can be
changed at any time (see page 25),
the balance setting can be
changed (see page 24) and you can
switch between stereo and mono
operation (see page 34).
* factory default setting
Advertisement
