Advertisement
Activated
Hearing profile LED
hearing
profile
–
No LED segment lit
Hearing
profile 1
st
1
LED segment lit
Hearing
profile 2
nd
2
LED segment lit
Selecting a hearing profile for sound
enhancement
The hearing profiles allow you to alter the sound of the audio
signal in order to improve the speech intelligibility and to
adjust the sound to suit your preferences. The profiles are
used to specifically change certain frequency ranges by e.g.
boosting or attenuating low-frequency or high-frequency
tones (see table).
All hearing profiles feature a compression function which
compensates for volume differences by boosting the volume
of quiet passages and reducing the volume of loud passages if
necessary.
The balance setting is saved on the stethoset receiver. If
you are using several receivers with a transmitter, the
respective receivers are optimally adjusted to match the
personal hearing preferences of the users (e.g. you and
your partner). Please note that the personal hearing pref-
erences can only be adjusted when only stethoset
receiver is connected to the transmitter.
Displaying the activated hearing profile
The activated hearing profile is not permanently displayed.
To check the activate hearing profile:
b
Switch the stethoset receiver on by putting it on (see page
19).
b
Hearing profile
Briefly press the
ter.
The currently activated hearing profile is displayed for
10 seconds.
Sound enhancement
The sound from the connected audio
source is reproduced unchanged.
Low-frequency tones are slightly
boosted to provide a warm, full sound.
High-frequency tones are reproduced
less piercing and clanking.
The sound from the connected audio
source is reproduced unchanged but
compression compensates for volume
differences.
Using the Set 880
button
on the transmit-
Compre
ssion
no
yes
yes
Set 880 | 25
Advertisement
