Advertisement
Switching between the audio sources
If e.g. a TV and a stereo hi-fi system are connected simultane-
ously to the transmitter, you can switch between the two audio
sources.
The selected audio source is not permanently displayed.
To check the selected audio source:
b
Switch the stethoset receiver on by putting it on (see page
19).
b
Audio source
Briefly press the
mitter.
The currently selected audio source is displayed for 10 sec-
onds:
Display
st
1
LED segment lit
th
5
LED segment lit
To change the audio source:
b
Audio source
Press the
for 2 seconds.
Playback switches between analog and digital audio
source.
2s
button
Selected audio source
The audio source connected to the
Analog 3.5 mm In
audio input is
selected.
The audio source connected to the
Digital Optical In
audio input is
selected.
button
on the transmitter
Analog
Audio
Using the Set 880
on the trans-
Digital
Audio
Set 880 | 21
Advertisement
