Advertisement
Putting the Set 880 into operation
Connection possibilities of the
audio source
Optical (digital)
A
3.5 mm jack
B
socket (analog)
RCA (analog)
C
SCART (analog)
D
10 | Set 880
Connecting the transmitter to audio sources
You can connect the transmitter to a digital and/or an analog
audio source (e.g. a TV and a stereo hi-fi system) and switch
between the audio sources/inputs.
You can also refer to the beginner's video guides on how
to connect your digital wireless headphone system to a
TV:
www.sennheiser-hearing.com/how-to-videos
b
Switch your audio source off before connecting the trans-
mitter.
b
Check the connection possibilities of your audio source
(audio output, usually marked "OUT").
b
Select the corresponding connection cable and, if neces-
sary, a suitable adapter.
b
To connect the transmitter to your audio source, refer to the
connection diagram suitable for your audio source (see the
following chapters). Follow the color codings on the trans-
mitter and on the cables.
Color
coding on
the
transmitter
If you want to connect the transmitter to a TV that has
only one HDMI output, you need an active HDMI audio
adapter. Using this adapter, you can connect your TV to
the transmitter.
An HDMI audio adapter and/or other accessories are
available from your Sonova Consumer Hearing partner.
Connection cable
Optical digital cable
Stereo audio cable
Stereo audio cable with RCA
adapter (3.5 mm jack socket to
2 RCA connectors)
Stereo audio cable with SCART
adapter (3.5 mm jack socket to
SCART connector; optional
accessory)
Page
11
12
13
13
Advertisement
