Eaton 93PM UPS Installation And Operation Manual page 134

Communication
7.2 Building Alarm Monitoring
This standard feature lets you connect the UPS to your building alarms, such as smoke detectors or
overtemperature alarms. The building alarm customer interface terminals for external are located inside the
UPS. Use twisted-pair wires for each alarm input and common.
The building alarms can be programmed to display the alarm functional name.
7.3 General Purpose Relay Contact
One general purpose relay contact is provided as a standard feature on the UPS. The relay contact customer
interface terminals are located inside the UPS. Use twisted-pair wires for the normally-closed or normally-open
and common connections.
Normally-closed or normally-open contacts can be used. If the state of the contact changes from the state
specified as normal, a signal is issued. This contact can be connected to equipment at the facility (such as a
light or an alarm bell) to notify the operator when an alarm is active on the UPS. This feature is useful if the UPS
is located in a remote area where the UPS horn may not be heard immediately.
Contacts should not be operated in excess of 30 Vac @ 5A maximum.
NOTE
7.4 Predict Pulse Remote Monitoring and Management Service
The Eaton 93PM UPS supports Eaton's PredictPulse remote monitoring and management service.
PredictPulse is a subscription monitoring and management service that collects and analyzes data from
connected power infrastructure devices, providing us with the insight needed to make recommendations and
take action on your behalf. It's also powered by CA Technologies, bringing together the best in hardware and
software. PredictPulse Service is included at no charge during the first year of Eaton 93PM UPS operation
(warranty period) along with the required connectivity parts. Beyond that, it may be purchased with Eaton
Support Agreements or as a standalone subscription after the initial warranty expires. PredictPulse may also
be subscribed to for free as part of a 90-day trial period. PredictPulse availability and first year bundled offers
may vary by market. For more information, visit www.eaton.com/predictpulse.
7.4.1 PredictPulse Service Features
PredictPulse provides proactive monitoring, an online dashboard, mobile app with alarm status information and
a monthly report detailing the ongoing health of your Eaton 93PM UPS. Features include:
Proactive monitoring that automatically analyzes the status of the Eaton 93PM UPS 96 times every day
l
(every 15 minutes). All health data gathered from the unit, current and historical, is analyzed at the Customer
Reliability Center (CRC). Algorithms and sophisticated analytics software is constantly scanning your UPS's
data for potential failures. Anomalies are escalated to a Software and Monitoring analyst or Technical
Support specialist. Critical events are remotely diagnosed to expedite repairs, including smart dispatch of
field technicians with probable cause and likely parts (avoiding return visits due to lack of required parts).
Through this service, the CRC can take pre-emptive, corrective action to ensure the highest level of
availability of your Eaton 93PM UPS.
Easy self-installation in minutes from a wizard installer or directly from the PXGMS card. PredictPulse uses
l
standard Eaton connectivity hardware, requiring no special software (devices only need to be connected to
a network).
7-2 Eaton 93PM UPS (20–50 kW, 480V Four Wire – 50 kW Frame) Installation and Operation Manual P-164000540—Rev 4
If contact ratings are required that can be operated above the rated voltage and
current available with the UPS general purpose relay contacts, an IRC-MS card
should be used.
CAUTION
www.eaton.com/powerquality