Table of Contents
Advertisement
Figure 6-15. Typical Statistics Screen
6.2.7
Sign In
The Controls and Setting screens are restricted. The user must sign in using a password to gain access.
To prevent inadvertent or unauthorized power disruption to the critical load or auxiliary lighting
system, change the Level 1 and Level 2 default passwords when system commissioning startup is
performed.
To Sign in:
1.
Tap the lock button in the upper right corner of the screen. The sign in screen is displayed (see
Figure 6-16).
2.
Tap the password entry area on the screen.
3.
Enter the password using the keypad displayed and tap the return key (see Figure 6-17).
Level 1 default password is 1111. Settings Level 2 default password is 0101.
4.
Sign in is complete. Tap continue to return to previous screen.
Eaton 93PM UPS (20–50 kW, 480V Four Wire – 50 kW Frame) Installation and Operation Manual P-164000540—Rev 4
CAUTION
www.eaton.com/powerquality
UPS Operating Instructions
6-13
Advertisement
Table of Contents
