Solutions When The Image Or Sound Contains Static When Using Screen Mirroring; Solutions When The Projected Screen Is Not Shared Correctly - Epson PowerLite EB-810E User Manual

• If you are unable to use two Screen Mirroring sources at the same time, set the Interrupt Connection
setting to Off.
Parent topic:

Solutions When the Image or Sound Contains Static When Using Screen Mirroring

If the projected image or sound contains static when connecting using Screen Mirroring, try the following
solutions:
• Avoid covering the Wi-Fi antenna of the mobile device.
• If you use a Screen Mirroring connection and an internet connection at the same time, the image may
freeze or contain noise. Disconnect from the internet to improve the connection speed of the mobile
device.
• Make sure the projection contents meet the Screen Mirroring requirements.
• Depending on the settings of the mobile device, the connection may be lost when the device enters
power saving mode. Check the power saving settings on the mobile device.
• Make sure your mobile device has the latest version of its wireless driver and firmware installed.
Parent topic:
Related references
Input Signal Settings - Signal I/O Menu
Image Quality Settings - Image Menu
Supported Video Display Formats
Related topics
Connecting to Computer Sources
Connecting to Video Sources

Solutions When the Projected Screen is not Shared Correctly

If the Screen Sharing feature does not deliver the screen to a receiving projector properly, try the
following solutions:
• Connect the projector to the same network as the projector that is sharing its screen.
• Make sure the receiving projector supports the Screen Sharing function.
• Make sure that the projector is not in Content Playback mode.
• Make sure the Screen Sharing setting in the Network menu is set to On for all projectors.
• Close any running Epson iProjection (Windows/Mac) software.
Solving Network Problems
Solving Network Problems
297