Wireless Network Projection - Epson PowerLite EB-810E User Manual

• Keyword Interrupt Display lets you select whether to display a projector keyword on the
projected image when accessing the projector using Epson iProjection.
Note: Use the displayed keyboard to enter the password and keyword. Press the arrow buttons on
the remote control to highlight characters and press
16. When you finish selecting settings, select Return and press
Settings menu.
17. Select Set, and follow the on-screen instructions to save your settings and exit the menus.
18. Press the LAN button on the remote control and confirm that the correct IP address is displayed on
the network information screen.
Parent topic:
Related references
Network Settings - Network Menu

Wireless Network Projection

You can project over a wireless network. To do this, you must set up your projector and computer for
wireless projection.
Note: Infrastructure mode supports 802.11b/g/n (2.4 GHz) and 802.11a/n/ac (5 GHz). Simple AP mode
supports 802.11g/n (2.4 GHz) and 802.11a/n/ac (5 GHz).
There are multiple ways to connect to your projector wirelessly:
• Creating a Quick Wireless Connection USB Key (Windows only) using the Epson iProjection software
• Configuring the connection manually using the projector's Network menus
• Simple AP mode lets you directly connect to smartphones, tablets, or computers using your projector
as an access point. When you use this method, connect the projector using Quick Connection Mode of
the Epson iProjection software or use Screen Mirroring.
After connecting and setting up the projector, install the projector software as necessary. You may need
to install it from a software CD, if included, or download the software and manuals as necessary.
Note: If your projector is connected via a LAN cable to a network that includes a wireless access point,
you can connect to the projector wirelessly through the access point using the Epson network software.
Wired Network Projection
Enter to select them.
Enter to return the Network
50