Scheduling Projector Events; Saving A Scheduled Event - Epson PowerLite EB-810E User Manual

Related tasks
Replacing the Air Filter
Cleaning the Air Filter and Vents

Scheduling Projector Events

You can save a projector command, such as turning the projector on or off or switching input sources, as
an "event." You can schedule when you want the projector to automatically execute the command.
Warning: Do not place flammable objects in front of the lens. If you schedule the projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note: The Schedule setting in the Menu Protection menu must be turned off to schedule an event.

Saving a Scheduled Event

Viewing Scheduled Events
Editing a Scheduled Event
Parent topic:
Related tasks
Setting a Password
Selecting Password Security Types
Saving a Scheduled Event
You can select projector commands you want to perform and schedule them as an event.
Warning: Do not place flammable objects in front of the lens. If you schedule a projector to turn on
automatically, flammable objects in front of the lens could catch on fire.
Note: Light Source Calibration events do not start if the projector is not used continuously for at least 20
minutes, or if the projector is regularly turned off by shutting off the power outlet. Set Light Source
Calibration events to occur only after 100 hours of usage.
1. Press the Menu button.
2. Select the Management menu and press
3. Select the Schedule Settings setting and press
4. Select the Schedule menu and press
Adjusting Projector Features
Enter.
Enter.
Enter.
209