Epson PowerLite EB-810E User Manual page 191

1. Hold down the Freeze button on the remote control for about 5 seconds or until you see this menu.
Note: If no password has been set, you will be prompted to set a password before you can view the
Password Protection setting.
Note: If Password Protection is already enabled, you must enter the correct password to display
the Password Protection setting menu.
2. Press the down arrow to select Password and press
You see the prompt "Change the password?".
3. Select Yes and press
Note: If you select No, the Password Protection setting menu is displayed again.
4. Press and hold down the Num button on the remote control and use the numeric buttons to set a
four-digit password.
The password displays as **** as you enter it. Then you see the confirmation prompt.
5. Enter the password again.
Enter.
191
Enter.