Solutions When Only A Partial Image Appears; Solutions When The Image Is Not Rectangular - Epson PowerLite EB-810E User Manual

Solutions When Only a Partial Image Appears

If only a partial computer image appears, try the following solutions:
• Make sure you selected the correct Screen Type setting in the projector's Installation menu for the
screen you are using. If there are margins between the edge of the image and the projected screen
frame, use the Screen Position setting to adjust the position of the image.
• Make sure the Scale setting in the Image menu is turned off.
• If you adjusted the image size using the Digital Zoom setting in the Installation menu, use the Image
Shift setting to adjust the image position.
• Press the Aspect button on the remote control to select a different image aspect ratio.
• If you zoomed into or out of the image using the E-Zoom buttons, press the Esc button until the
projector returns to a full display.
• Check your computer display settings to disable dual display and set the resolution within the
projector's limits. (See your computer manual for details.)
• Check the resolution assigned to your presentation files to see if they are created for a different
resolution than you are projecting in. (See your software help for details.)
• Make sure you selected the correct Projection setting in the Installation menu.
• If you are projecting in Content Playback mode, make sure you are using the correct Overlay Effect
setting in the Operation > Content Playback menu.
Parent topic:
Related references
Input Signal Settings - Signal I/O Menu
Installation Settings - Installation Menu
Image Quality Settings - Image Menu
Related tasks
Zooming Into and Out of Images
Changing the Image Aspect Ratio

Solutions When the Image is Not Rectangular

If the projected image is not evenly rectangular, try the following solutions:
• If the projector is not mounted on the wall or ceiling, place it directly in front of the screen, lining up the
lens with the center of the screen, if possible.
• Adjust the image shape using the Geometry Correction menu settings.
Solving Image or Sound Problems
286