Selecting The Language For The Projector Menus - Epson PowerLite EB-810E User Manual

Note: The projector supports the direct shutdown feature; it can be turned off directly using the breaker.
1. Press the power button on the projector or remote control.
The projector displays a shutdown confirmation screen.
2. Press the power button again. (To leave it on, press any other button.)
The projector beeps twice, the laser turns off, and the Status light turns off.
Note: If the Light Source Calibration setting is set to Run Periodically in the projector's
Management menu, light source calibration starts automatically if you turn off the projector and the
following conditions are present:
• 100 hours have passed since the last light source calibration.
• You have used the projector continuously for at least 20 minutes.
3. To transport or store the projector, make sure the On/Standby light is blue (not flashing) and the
Status light is off, then unplug the power cord.
Caution: To avoid damaging the projector or laser, never unplug the power cord when the Status
light is on or flashing.
Parent topic:
Related references
Administration Settings - Management Menu

Selecting the Language for the Projector Menus

If you want to view the projector's menus and messages in another language, you can change the
Language setting.
1. Turn on the projector.
2. Press the Menu button on the projector or remote control.
Using Basic Projector Features
109