Saving Settings To A Usb Flash Drive - Epson PowerLite EB-810E User Manual

Epson Projector Management Operation Guide for instructions. You can download the latest software
and documentation from the Epson website.

Saving Settings to a USB Flash Drive

Transferring Settings from a USB Flash Drive
Saving Settings to a Computer
Transferring Settings from a Computer
Parent topic:
Saving Settings to a USB Flash Drive
You can save the projector settings you want to transfer to a USB flash drive.
Note: Use an empty flash drive. If the drive contains other files, the transfer may not complete correctly.
The flash drive must use the FAT format and cannot have any security features.
1. Turn off the projector and unplug the power cord from the projector's power inlet.
2. Insert the flash drive into the USB-A port.
Note: Connect the flash drive directly to the projector. Do not use a hub or your settings may not be
saved correctly.
3. Press and hold the Esc button on the control panel or remote control as you connect the power cord
to the projector's power inlet.
4. When all of the projector lights turn on, release the Esc button.
The lights flash to indicate that settings are transferring to the flash drive. When the lights stop
flashing, the projector turns off.
Caution: Do not unplug the power cord or remove the flash drive while the lights are flashing. This
could damage the projector.
5. Remove the flash drive.
Note: The file name for the batch setup file is PJCONFDATA.bin. If you need to change the file
name, add text after PJCONFDATA using only alphanumeric characters. If you change the
PJCONFDATA section of the file name, the projector may not be able to recognize the file correctly.
Adjusting Projector Features
205