Setting
HDBaseT
Reset Signal I/O Settings
Parent topic:
Installation Settings - Installation Menu
Settings on the Installation menu let you set up your projector for your installation environment. The
available settings depend on the currently selected input source and other settings.
Options
Control Communications Enables or disables communication from
Extron XTP
—
Adjusting the Menu Settings
Description
the Ethernet and serial ports on the
HDBaseT transmitter or switcher; turning
on this setting disables the projector's LAN
and RS-232C ports. Setting is only
displayed when Extron XTP is set to Off.
Set to On when you connect an Extron XTP
transmitter or switcher to the HDBaseT
ports.
Resets all settings on the Signal I/O menu
to their default values
226