Epson PowerLite EB-810E User Manual page 63

Setting
EAP Method
IP Settings
DNS Server 1/ DNS Server 2
IPv6
Auto Configuration
Options
EAP Type
User name
Password
Client Certificate
Verify Server Certificate
CA certificate
RADIUS Server Name
DHCP (On or Off)
IP Address
Subnet Mask
Gateway Address
Various IP addresses
On
Off
On
Off
63
Description
Sets the EAP settings for WPA3-
EAP and WPA2/WPA3-EAP
security
Selects DHCP if your network
assigns IP addresses
automatically, or turns off DHCP
so you can enter the network's IP
address, subnet mask, and
gateway address as needed
Sets the IP address for the DNS
server using 0 to 255 for each
address field. The DNS server
resolves the host name
Note: Do not use 127.x.x.x
(where x is a number from 0 to
255). When these settings are
not set and remain as 0.0.0.0,
DNS server information is
acquired using DHCP. After
acquiring the information, the
values remain as 0.0.0.0.
Enables IPv6 to allow monitoring
and control of the projector over
a network using Epson Web
Control and PJLink
Selects whether to automatically
assign addresses according to
the Router Advertisement