Epson PowerLite EB-810E User Manual page 106

The Status light flashes blue as the projector warms up. When the projector is warmed up, the
Status light stops flashing and turns blue.
Warning: Never look into the projector lens when the laser is on. This can damage your eyes and is
especially dangerous for children and pets. If you are using the remote control to turn the projector
on, make sure no one is looking into the lens or in front of the projector before turning it on.
Caution: Make sure no objects are blocking the light from the projector lens. Objects blocking the
lens for an extended time can melt, burn, or start a fire, and light that is reflected back into the lens
can cause the projector to malfunction. To stop projection, use the A/V Mute function, or turn off the
projector (blanking the screen will not pause video content).
Note: When you turn on the projector for the first time, the initial setup wizard is displayed. Make the
necessary Projection, Language, and Date & Time changes using the control panel or remote
control. Adjust the shape and position settings for the projected image as necessary. Turn on the
Quick Startup setting to start the projector faster if necessary. When Quick Startup is enabled in
the projector's Operation menu, the projector becomes ready for use in several seconds the next
time you turn the projector on.
6. Turn on the connected video source.
7. Carefully replace the projector's side cover.
Note: When the Direct Power On setting is set to On in the projector's Operation menu, the
projector turns on as soon as you plug it in. Note that the projector also turns on automatically in
cases such as recovery from a power outage. If you select a specific port as the Auto Power On
setting in the projector's Operation menu, the projector turns on as soon as it detects a signal or
cable connection from that port.
If you do not see a projected image right away, try the following:
• Turn on the connected computer or video device.
• Insert a DVD or other video media and press the play button, if necessary.
• Press the Source button on the control panel or remote control and select the desired input.
• Change the screen output from the computer when using a laptop.
Using the Home Screen
Parent topic: Using Basic Projector Features
106