Usb Display System Requirements - Epson PowerLite EB-810E User Manual

Setting
Standby Mode
Parent topic:
Related references
Projector Light Source Specifications

USB Display System Requirements

Your computer system must meet the system requirements here to use the projector's USB Display
software.
Requirement
Operating system
Options
Communication On
Communication Off
Adjusting the Menu Settings
Windows
Windows 8.x, Pro, and Enterprise (32-
and 64-bit)
Windows 10 Home, Pro, and Enterprise
(32- and 64-bit)
Windows 11 Home, Pro, Enterprise, and
Education (64-bit)
Description
Enable this setting to allow
monitoring and control of the
projector over a network when
the projector is in standby mode;
this setting is only displayed in
the following cases:
• Auto Power On is disabled in
• Auto Power On is not set to
• A/V Output is set to While
• USB Power is set to On While
Mac
macOS 10.13.x (64-bit), macOS
10.14.x (64-bit), macOS 10.15.x (64-
bit), macOS 11.0.x (64-bit), and
macOS 12.0.x (64-bit)
258
the projector's Network menu
HDMI1 and Power On Trigger
is set to Plug-in Detection
Projecting in the Signal I/O
menu
Projecting