Setting Up Crestron Connected - Epson PowerLite EB-810E User Manual

Note: You cannot use the Message Broadcasting feature in the Epson Projector Management software
when you use Crestron Connected. If you set Standby Mode to Communication On in the Operation
menu, you can control the projector even if the projector is in standby mode (when the power is off).
For additional information on Crestron Connected, contact Crestron.

Setting Up Crestron Connected

Controlling a Networked Projector Using Crestron Connected
Parent topic:
Setting Up Crestron Connected
To set up your projector for monitoring and control using a Crestron Connected system, make sure your
computer and projector are connected to the network.
Note: You cannot use the Message Broadcasting feature in Epson Projector Management when you use
Crestron Connected.
Note: If you want to use the Crestron Connected system when the projector is turned off, you need to
adjust the Standby Mode setting in the Operation menu. The Standby Mode setting is displayed only if
the A/V Output setting in the Signal I/O menu is set to While Projecting.
1. Press the Menu button.
2. Select the Network menu and press
3. Select Network Settings and press
Note: If the Remote Password and the Web Control Password have not been set, a screen appears
prompting you to set them. Enter passwords up to 32 characters long. These passwords are used
for accessing the projector over a network, and you do not need to enter them to access the Network
Settings menu after you set them.
Using the Projector on a Network
Enter.
Enter.
91