Setting Up The Projector; Projector Placement - Epson PowerLite EB-810E User Manual

Setting Up the Projector

Follow the instructions in these sections to set up your projector for use.

Projector Placement

Projector Connections
Connecting to an HDBaseT Transmitter
Connecting Multiple Projectors of the Same Model
Attaching and Removing the Side Cover
Installing Batteries in the Remote Control
Projector Placement
You can place the projector on a flat surface such as a desk or table to project in a portable setup.
You can also install your projector on a wall using the optional ELPMB75 wall mount (V12HB12010), or
mount it from the ceiling or vertically on a table using a commercially available mount compatible with the
VESA Mounting Interface Standard (100 x 200 mm).
Keep these considerations in mind as you select a projector location:
• If installing with the ELPMB75 wall mount, follow the instructions in the online Installation Guide
provided with your mounting hardware to install the projector.
• Leave plenty of space around and under the projector for ventilation, and do not place it on top of or
next to anything that could block the vents.
• If you are using the projector at altitudes above 4921 feet (1500 m), set the High Altitude Mode
setting to On in the projector's Installation menu to ensure the projector's internal temperature is
regulated properly.
• Position the projector within reach of a grounded electrical outlet or extension cord.
• If the projector is not mounted, install the front adjustable feet and the rear adjustable foot and place it
on a sturdy, level surface.
• Place the projector so it squarely faces the screen, not at an angle. If you cannot install the projector
squarely facing the screen, correct any resulting image distortion using the projector controls.
• Try not to set up the projector in locations subject to high humidity and dust, or in locations subject to
smoke from fires or tobacco smoke.
• Make sure there is no strong light or sunlight shining on the projector or the projection screen.
Projector Setup and Installation Options
26