System And Port Leds Model Xs708T - NETGEAR XS708T Hardware Installation Manual

8-Port, 12-Port, and 16-Port Gigabit Smart Managed Pro Switch
Figure 2. Back panel model XS708T
Number
1
2
3

System and Port LEDs Model XS708T

The following table describes the RJ-45 and SFP+ slot LED designations. Each RJ-45 port provides a left
LED and a right LED and each SFP+ slot provides two LEDs.
Table 1. LEDs on model XS708T switch
LED Description
Power LED
• Solid green. The device is powered on.
• Solid yellow. The device is booting.
• Off. Power is not supplied to the device.
Fan LED
• Solid yellow. The fans have failed.
• Off. The fan is operating normally.
Speed and ACT
LEDs for copper
• Off: No link is established.
ports 1 to 8
• Solid green: A valid 1000 Mbps link is established.
• Blinking green. The port is transmitting or receiving
packets at 1000 Mbps.
• Solid yellow. A valid 10 or 100 Mbps link is established.
• Blinking yellow. The port is transmitting or receiving
packets at 10 or 100 Mbps.
Description
Serial console (not for customer use)
Kensington lock slot
AC power connector
Hardware Overview
12