Placing Calls; Placing Emergency Calls; Placing Emergency Calls Using The Lim Line - Mitel MiVOICE OFFICE 250 User Manual

Placing Calls

The following instructions describe how to place calls and related features.

Placing Emergency Calls

WARNING:CONTACT YOUR SYSTEM ADMINISTRATOR AND YOUR LOCAL
MITEL PROVIDER FOR IMPORTANT INFORMATION ABOUT DIALING
EMERGENCY SERVICES BEFORE USING YOUR IP PHONE.
When dialing an emergency number (911 U.S. or 999/112 Europe), you do not have to press
the Outgoing button or enter the Outgoing Call access code (8 is the default code). The system
automatically places emergency calls immediately after you dial the number, even if you do not
select an outside line.

Placing Emergency Calls using the LIM Line

Emergency Number dialing should only be performed by picking up the handset and selecting
the Analog Line key you have programmed. If Privacy Mode is enabled and the Analog Line
key local line is busy, dialing will not occur on the LIM line. Emergency dialing using an IP
connection may not be supported due to system configuration and country location. For more
information, contact your System Administrator. For details about LIM, see "Using the Line
Interface Module (LIM)" on
To make an Emergency Call using the Line Interface Module line:
1. Lift the handset.
2. Press the Analog Line key that you have programmed. ANALOG CALL appears.
3. Dial your local emergency number.
To make an Emergency Call using the Line Interface Module line, when the IP
connection has failed:
1. Lift the handset.
2. Press the Analog Line key that you have programmed. IP FAIL: ANALOG CALL appears.
3. Dial your local emergency number.
page 15.
Answering and Placing Calls
45