Making and Answering Calls Using the Failover Mode
Making and Answering Calls Using the Failover Mode
To make a call using the LIM line during an IP connection failure:
1.
2.
To answer a call using the LIM line during an IP connection failure:
Placing Emergency Calls Using the LIM Line
Emergency Number dialing should only be performed by picking up the handset and selecting
the LIM line key you have programmed. If Privacy Mode is enabled and the LIM line key local
line is busy, dialing will not occur on the LIM line. Emergency dialing using an IP connection
may not be supported due to system configuration and country location. For more information,
contact your System Administrator.
To make an Emergency Call using the LIM line:
1.
2.
3.
To make an Emergency Call using the LIM line, when the IP connection has failed:
1.
2.
3.
Page 10
Lift the handset.
Dial the number.
Lift the handset. The call is answered. IP FAIL: ANALOG CALL appears.
Lift the handset.
Press the LIM line key that you have programmed. ANALOG CALL appears.
Dial your local emergency number.
Lift the handset.
Press the LIM line key that you have programmed. IP FAIL: ANALOG CALL appears.
Dial your local emergency number.
®
Mitel
5000 CP Phone User Guide Supplement for v4.0, May 2010