Mitel 5320e/5330e/5340e User Guide
Changing the DND Settings
See "Using Do-Not-Disturb (DND)" on
To turn on DND using Remote Programming:
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your station passcode followed by #. See
for your extension.
5. Dial 370.
6. Enter the DND message number (01 to 20), and then enter the second-line message text
(if applicable).
To turn off DND using Remote Programming:
•
Follow steps 1. through 4. above, and then dial 371.
Changing the Manual Call Forwarding Settings
See "Manual Call Forwarding" on
To turn on Manual Call Forwarding using Remote Programming:
1. Do one of the following:
•
Call your DISA number (provided by your system administrator). If necessary, enter
your DISA security code.
•
Use any phone on the system.
2. Dial 359.
3. Enter your extension number.
4. Enter your station passcode followed by #. See
for your extension.
5. Dial one of the following Call Forwarding feature codes:
•
355 (All)
•
356 (No answer)
•
357 (Busy)
•
358 (No Answer/Busy)
6. Enter either an extension number or 8 followed by a phone number.
78
page 85
for more information about using DND.
page 73
page 59
for more information about Manual Call Forwarding.
page 73
for details on setting up a passcode
for details on setting up a passcode