Answering And Placing Calls; Answering Calls; Answering Waiting Calls - Mitel 8660 User Manual

Answering and Placing Calls

The following instructions describe how to answer and place internal and external calls and how
to use related features.
NOTE

Answering Calls

Your phone may be preset to automatically answer incoming internal calls in Handsfree Mode.
See "Using Handsfree Mode" on
handset or headset to answer incoming calls.
To answer a call:

Answering Waiting Calls

If you receive a call while you are on another call, you hear a "call waiting" tone, the IC or CALL
button flashes, and the display shows the Caller ID information (if available).
To answer a waiting call:
Mitel ® 8560/8660 Phone User Guide – Issue 15, February 2011
By default, internal (intercom) calls are assigned to the IC button, and external
calls are assigned to the CALL buttons.
page
Lift the handset, or press
answer a call in Handsfree Mode.
If you are currently on a call, press the flashing IC or CALL button to answer a waiting
call. See ""Answering Waiting
Press the flashing IC or CALL button. This action hangs up on the connected call and
connects you to the waiting call. You can also place the first call on hold before you
answer the waiting call. See "Placing Calls On Hold" on
Answering and Placing Calls
31. After disabling Handsfree Mode, you can use your
(Speaker) to answer a call while using a headset, or to
Calls"" below.
page 32.
Page 21