Using The Configuration Assistant; Changing Your Station Passcode; Accessing The Configuration Assistant - Mitel MiVOICE OFFICE 250 User Manual

Using the Configuration Assistant

If Configuration Assistant is enabled for your system, you can access this voice guided
configuration portal that provides easy-to-use, remote access to the following phone
configuration options:
• Dynamic Extension Express (see
• DND (see page
• Manual Call Forwarding (see
• Meet-Me Conferencing (see
Note: You need a Configuration Assistant extension number to use this feature.
Contact your system administrator for more information.

Changing Your Station Passcode

Before using the Configuration Assistant, Mitel recommends that you change your default
station (phone) passcode to something more secure.
To change your station passcode:
1. Dial 392. ENTER PASSCODE appears.
2. Enter your current passcode (the default passcode is your extension number), followed by
#. CHANGE PASSCODE TO appears.
3. Enter the new passcode followed by #. VERIFY PASSCODE appears.
4. Enter the new passcode again followed by #. DATABASE UPDATED appears.
To change the passcode from another phone, see "Changing Your Station Passcode" on
page 79.

Accessing the Configuration Assistant

Follow the instructions below to access the Configuration Assistant.
To access the Configuration Assistant:
1. Access the Configuration Assistant extension number from inside or outside the system by:
• dialing it from any phone in the system.
• being transferred to it.
• dialing it from automated attendant, voice mail, or DISA.
2. Do one of the following:
• If calling from your main desktop phone, proceed to step 3.
page
74)
page 75)
page 75)
77)
Call Features
73