Agilent Technologies 34901A User Manual page 400

Chapter 8 Tutorial
Multifunction Module
Voltage (DAC) Output
The 34907A module has two analog outputs capable of outputting
calibrated voltages between
(Digital-to-Analog Converter) channel can be used as a programmable
voltage source for analog input to other devices.
16-Bit
Digital Data
• You can set the output voltage to any value between +12 Vdc and
-12 Vdc, in 1 mV steps. Each DAC is earth referenced, it cannot float.
• Each DAC channel is capable of supplying 10 mA maximum current.
Note: You must limit the output current to 40 mA total for all three
slots (six DAC channels).
• To maintain the rated output accuracy, the load (R
shown above) must be greater than 1 k
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
±
12 volts with 16 bits of resolution. Each DAC
Output Voltage
DAC
Ω
.
R
L
in the diagram
L
8
397