Agilent Technologies 34901A User Manual page 225

Data acquisition/switch unit
Table of Contents

Advertisement

Chapter 5 Remote Interface Reference
Temperature Configuration Commands
RTD Commands
[SENSe:]TEMPerature:TRANsducer
:RTD:TYPE {85|91}[,(
:RTD:TYPE? [(
:FRTD:TYPE {85|91}[,(
:FRTD:TYPE? [(
Select the RTD type for 2-wire or 4-wire measurements on the specified
channels. Use "85" to specify
or "91" to specify
The default is "85". The :TYPE? query returns the RTD type in use on
the specified channels. Returns "+85" or "+91".
[SENSe:]TEMPerature:TRANsducer
:RTD:RESistance[:REFerence] <
:RTD:RESistance[:REFerence]? [(
:FRTD:RESistance[:REFerence] <
:FRTD:RESistance[:REFerence]? [(
Set the nominal resistance (R
channels. Select a value between 49
The :REF? query returns the nominal resistance (R
specified channels. Returns a number in the form " +1.00000000E+02 ".
Thermistor Commands
[SENSe:]TEMPerature:TRANsducer
:THERmistor:TYPE {2252|5000|10000}[,(
:THERmistor:TYPE? [(
Select the thermistor type for measurements on the specified channels.
The default is a 5 k
thermistor type in use on the specified channels. Returns "2252", "5000",
or "10000".
222
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
ch_list
@
<
>)]
<
ch_list
>)]
@
@
ch_list
<
>)]
ch_list
<
>)]
@
α
= 0.00385 (ITS-90 software conversions)
α
= 0.00391 (IPTS-68 software conversions).
reference
reference
) for RTD measurements on the specified
0
and 2.1 k
@
<
ch_list
>)]
thermistor. The :TYPE? query returns the
ch_list
>[,(
@
<
>)]
@
<
ch_list
>)]
@
ch_list
>[,(
<
>)]
@
<
ch_list
>)]
. The default is 100
) in use on the
0
@
<
ch_list
>)]
.

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents