Select Patches; Specify The Key Ranges In Which The Bell Will Sound; Adjusting The Volume Balance Of The Piano And Bell - Roland Fantom X6 User Manual

Select Patches

1.
Change the sound selected for part 1 so that it plays "PR-F:009 UltimatGrand."

Specify the Key ranges in which the bell will sound

In the Performance Layer screen, press [F3 (Key Range)]. The screen lets you specify the key range of each
part.
Use cursor (up/down) to
1
select part 2.

Adjusting the volume balance of the piano and bell

Adjust the balance as desired. For example, you might want the piano to be heard as the main component
of the sound, with the bell lightly added to it.
Use cursor (up/down) to select part 1,
and press [F1 (Patch List)]...
Specify the key range in which the selected part will sound.
2
Move the cursor to "Lower" (or "Upper") and use VALUE dial to set the value,
then press "Set Lower" (or "Set Upper").
Part 1: piano volume
Part 2: bell volume
Use [CURSOR] (left/right) to select a part, use [CURSOR] (up/down) to select "LEVEL,"
and then use the VALUE dial to adjust the volume.
Playing two or more sounds simultaneously (Layers)
Use [F1]/[F2] to select "AC.Piano," and then use
the VALUE dial to select "PR-F: 009 UltimaGrand."
After making your selection, press [F8 (Select)] to finalize it.
15