How To Update The “System Program” Or The “Test Program” By Floppy Disk; Test Mode - Roland Va-3 Service Notes

How to update the System program or the Test program by Floppy disk
***SYSTEM MENU***
BANK1: SYSTEM VERSION
BANK2: SYSTEM LOAD
BANK3: SYSTEM SAVE
***SYSTEM LOAD***
NUMBER1: CONTINUE
NUMBER2: EXIT
***SYSTEM LOAD***
Program loading ...... ------------------
Program checking ...... ------------------
Flash updating ...... ------------------
<< TURN INSTRUMENT ON AGAIN >>

TEST MODE

VA-3 test Ver. x x . x x
-BANK/NUMBER- -SUPER TONES-
1 Switch 1 Flash
2 Encoder 2 Rom Style
3 Adc 3 Ram
4 Lcd 4 FDD
5 Led 5 Audio Test
6 Keyscan
7 Touch screen
8 Midi
DATE: (day) (month) xx xx:xx:xx (year)
BANK/NUMBER and SUPER TONES
First group of test => BANK/NUMBER
1. SWITCH test
SWITCH TEST
XXXX XX XXX
* * * * * * * * * * * * * * * * * * * * * *
* * * * * * * * * * * * * * * * * * * * * *
* * * *
XXXX XX XXX
Press Bank 8 and Bank5 to exit
Note:
2. ENCODER check
TEST ENCODER
ENCODER Þ Þ XXX
Press Bank 5 to exit
3. ADC Check
ADC TEST
Bender (0 +/- 127)
Modulation (0 - 127)
D. Beam (0 - 127)
Express xxx
Sustain xxx
Press BANK 5 to exit