Troubleshooting; Error & Status Messages On The Control Panel - Ricoh CL4000DN Maintenance Manual

Troubleshooting

Error & Status Messages on the Control
Panel
This section explains what the messages that appear on the control panel mean
and what to do when a particular message appears.
❖ Messages (in alphabetical order)
Messages
Add Toner
Black
Add Toner
Cyan
Add Toner
Magenta
Add Toner
Yellow
Add Toner
XXX/XXX
Calibrating...
Call Service: EC
Power Off On
/ If Error Reoccur
Call Service
Cannot check
Signal in Ad hoc
G1058613A_1.10
Description
The printer is out of toner (B).
The printer is out of toner (C).
The printer is out of toner (M).
The printer is out of toner (Y).
The printer is out of the indicat-
ed toner(s).
XXX: Yellow/Magenta/Cy-
an/Black
The printer is calibrating the
color.
A communication error sent
from the engine to the control-
ler.
An attempt to check the radio
signal was made while the
communication mode was set
to [Ad hoc] in the interface set-
tings.
Recommended Action
Replace the toner cartridge
(B).
See p.32 "Replacing the Ton-
er Cartridge".
Replace the toner cartridge
(C).
See p.32 "Replacing the Ton-
er Cartridge".
Replace the toner cartridge
(M).
See p.32 "Replacing the Ton-
er Cartridge".
Replace the toner cartridge
(Y).
See p.32 "Replacing the Ton-
er Cartridge".
Replace the toner cartridge of
the indicated color(s).
See p.32 "Replacing the Ton-
er Cartridge".
Wait a while.
A communication error sent
from the engine to the control-
ler.
To check the radio signal , se-
lect Infrastructure in the com-
munication mode settings.
Copyright © 2004, 2005
83