Replacing Consumables and Maintenance Kit
Replacing the Friction Pad
Replace all the friction pads in the tray. The following procedure shows how to
replace the tray's friction pad (Tray 1).
A
Carefully slide the paper tray (Tray 1) out, until it stops. Then, lift the
front slightly, and then pull the tray completely out.
B
Remove paper from the paper tray. Place the tray upside down on a flat
surface.
C
Use a pointed implement such as a ball-point pen, to carefully press
down the two catches securing the friction pad.
❒ The friction pad may fall away when released. Place your hand over the
friction pad while pressing the catches.
52