Cleaning The Paper Feed Roller - Ricoh CL4000DN Maintenance Manual

Cleaning the Printer

Cleaning the Paper Feed Roller

If the paper feed roller is dirty, a misfeed might occur. In this case, clean the roller
as follows:
• When lifting the printer, use the grips on both sides of the printer, otherwise
the printer might fall and cause personal injury.
• When you move the printer, unplug the power cord from the wall outlet to
avoid a fire or an electric shock.
• When you pull out the plug from the socket, grip the plug to avoid damaging
the cord and causing a fire or an electric shock.
A
Turn off the power switch.
B
Pull out the plug from the socket. Remove all the cables from the printer.
C
Slowly slide the paper tray (Tray 1) out, until it stops. After that, lift the
front of the tray slightly, and then pull the tray completely out.
D
Move the printer to the edge of a stable table or desk.
❒ Do not put the printer on an unstable or tilted surface.
65