Ifconfig - Ricoh Aficio 1027 Network Manual

Monitoring and Configuring the Printer
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
Interface name
ether
ip1394
2
wlan
❖ Initializing the printer name for each
interface
msh>hostname "interface
_name" clear name

ifconfig

Use the "ifconfig" command to view
and configure TCP/IP (IP address,
subnet mask, broadcast address, de-
fault gateway address) for the printer.
❖ View settings
msh> ifconfig
❖ IPv4 Configuration
msh> ifconfig "interface
_name" "parameter" "ad-
dress"
• If you did not enter an interface
name, it is automatically set to
the Ethernet interface.
• ip1394 can be specified only
when the IEEE 1394 interface is
installed.
68
Interface config-
ured
Ethernet interface
IEEE 1394 interface
IEEE 802.11b inter-
face
• wlan can be specified only
when the IEEE 802.11b interface
is installed.
Interface name
ether
ip1394
wlan
The following explains how to
c o n f i g u r e a n I P v 4 a d d r e s s
192.168.15.16 on Ethernet inter-
face.
msh> ifconfig ether 192.168.
15.16
❖ IPv6 Configuration
msh> ifconfig ether inet6
interface_name " "printer
_name"
The following explains how to
c o n f i g u r e a I P v 6 a d d r e s s t o
2001:DB8::100 with prefix length
64 on the Ethernet interface.
msh> ifconfig ether inet6
2001:DB8::100 64
❖ Netmask configuration
msh> ifconfig "interface
_name" netmask "address"
The following explains how to con-
figure a subnet mask 255.255.255.0
on Ethernet interface.
msh> ifconfig ether net-
mask 255.255.255.0
❖ Broadcast address configuration
msh> ifconfig "interface
_name" broadcast "address"
Interface config-
ured
Ethernet Interface
IEEE 1394 Inter-
face
IEEE 802.11b Inter-
face