Installing Smartdevicemonitor For Admin; Changing The Network Interface Board Configuration - Ricoh Aficio 1027 Network Manual

• Using Address Management Tool,
you can manage LAN-Fax num-
bers, user names for Scan to Fold-
er, and addresses for sending and
receiving Internet faxes.
• The e-mail sender's name and
folder can be protected.
Installing SmartDeviceMonitor
for Admin
Follow the procedure below to install
SmartDeviceMonitor for Admin
A
Quit all applications currently running.
B
Insert the CD-ROM into the CD-
ROM drive.
The installer starts.
C
Select an interface language, and
then click [OK].
The following languages are avail-
able: Czech, Danish, German, Eng-
lish, Spanish, French, Italian,
Hungarian, Dutch, Norwegian,
Polish, Portuguese , Finnish,
Swedish, Chinese Simple and Chi-
nese Traditional.
D
Click [SmartDeviceMonitor for Admin].
E
Click [Next >].
The software license agreement
appears in the [License Agreement]
dialog box.
F
After reading through its contents,
click [Next >].
G
Follow the instructions on the screen.
A message appears when the in-
stallation is completed.
Using SmartDeviceMonitor for Admin
H
Click [OK].
A message about restarting the
computer may appear. Restart the
computer to complete installation.
Note
❒ Auto Run may not work under
certain operating system set-
tings. In this case, launch "Set-
up.exe" located on the CD-
ROM root directory.
❒ If you are required to restart the
computer after installing Smart-
DeviceMonitor for Admin, re-
start the computer and continue
the configuration.
Changing the Network
Interface Board Configuration
Follow the procedure below to
change the network interface board
configuration using SmartDevice-
Monitor for Admin.
A
Start SmartDeviceMonitor for Admin.
B
On the [Group:] menu, point to
[Search Device], and then click
[TCP/IP], [IPX/SPX] or [TCP/IP SNMPv3].
A list of machines using the select-
ed protocol appears.
Select the protocol of the machine
whose configuration you want to
change.
If you are using TCP/IP SNMP v3,
enter the user authentication.
C
In the list, select a machine whose
configuration you want to change.
2
43