Ssh; Status; Syslog; Upnp - Ricoh Aficio 1027 Network Manual

ssh

Use the "ssh" command to view and
configure SSH settings.
❖ View settings
msh> ssh
❖ Data compression communication
settings
m s h > s s h c o m p r e s s i o n
{on|off}
The default is "on".
❖ SSH/SFTP communication port setting
msh> ssh port {22, 1024–
65535}
The default is 22.
❖ SSH/SFTP communication timeout
setting
msh> ssh timeout {0–65535}
The default is 300.
❖ SSH/SFTP communication login time-
out setting
msh> ssh logintimeout {0–
65535}
The default is 300.
❖ Setting an open key for SSH/SFTP
msh> ssh genkey {512|768|
1024} "character string"
Create an open key for SSH/SFTP
communication.
Usable characters are ASCII 0x20-
0x7e (32 bytes) other than "0".
The default key length is 1024, and
the character string is blank.
❖ Deleting open key for ssh/sftp com-
munication
msh> ssh delkey
Note
❒ If you do not specify a character
string, current setting is displayed.
Remote Maintenance by telnet

status

Use the "status" command to display
the printer status.
❖ view messages
msh> status
Reference
p.86 "Current Printer Status"

syslog

Use the "syslog" command to display
the information stored in the printer's
system log.
❖ View message
msh> syslog
Reference
p.105 "System Log Information"

upnp

Use the "upnp" command to display
and configure the universal plug and
play.
❖ Public URL display
msh> upnp url
❖ Public URL configuration
msh> upnp url "string"
• Enter the URL string in the char-
acter string.
❖ Deleting Public URL
msh> upnp clear url
2
79