Help; Hostname; Ifconfig - Ricoh PRO C900S Network Manual

1. Monitoring and Configuring the Machine
Deleting the Domain Name
msh> domainname "interface_name" clear name
1

help

Use the "help" command to display the available command list and the procedures for using those
commands.
Command list display
msh> help
Display of procedure for using commands
msh> help "command_name"

hostname

Use the "hostname" command to change the host name.
View settings
msh> hostname
IPv4 Configuration
msh> hostname "interface_name" "printer_name"
• Enter the printer name using up to 63 alphanumeric characters.
• You cannot use a printer name beginning "RNP" (in either upper or lower case).
• If you did not enter an interface name, it is automatically set to the Ethernet interface.
ether
Initializing the host name for each interface
msh>hostname "interface_name" clear name

ifconfig

Use the "ifconfig" command to view and configure TCP/IP (IP address, subnet mask, broadcast address,
default gateway address) for the machine.
View settings
msh> ifconfig
34
Interface name Interface configured
Ethernet interface