Copying - Ricoh FAX3310LE Operating Instructions Manual

Copying

If you need to make a copy and there
is no copier available, use your fax
machine. Just place your original in
the feeder, and press the { { { { Copy} } } } key.
Important
❒ When making multiple copy sets,
copying starts once all originals
have been scanned into memory. If
memory runs out (free memory
reaches 0%) while scanning in, the
copy job is canceled and originals
that have been scanned in so far
are deleted from memory.
Note
❒ If you frequently use the fax ma-
chine to make copies and do not
want to wait 40 seconds for the ma-
chine to warm up after it has en-
tered the Energy Saving mode, you
can change the setting of the Ener-
gy Saving feature so that the heater
cools only halfway. See p.83 "User
Parameters" (switch 05, bit 6).
❒ Place your original and select any
scan settings in the same way as
for fax transmission.
❒ Multiple copy sets are sorted and
delivered in page order.
❒ If you wish to prevent passersby
from freely making copies, you can
disable the copy feature with the
User Parameters. See p.83 "User
Parameters" (switch 12, bit 7).
❒ You can specify between 1 and 99
copies.
5. Copying
A A A A
Press the { { { { Copy} } } } key.
Note
❒ Pressing the { { { { Copy} } } } key again
returns the machine to standby
display.
B B B B
Place your original in the docu-
ment feeder face up.
If you have the optional paper tray
or bypass tray, you can select the
paper tray by pressing 0 or 1.
C C C C
Adjust any scan settings as neces-
sary.
Note
❒ If your original is longer than
the copy paper you choose, only
the length of the copy paper will
be copied.
D D D D
Enter the number of copies you
need with the number keys.
If you make a mistake, press the
{ { { { Clear/Stop} } } } key and try again.
E E E E
Press the { { { { OK} } } } key.
41