Placing A Waypoint - Raymarine RL70C Owner's Handbook Manual

Chapter 5: Standard Chart Operations

Placing a Waypoint

The Place and Goto a Waypoint Scenario in Chapter 2 provides a simple
example of how to place a waypoint.
➤ To access the place waypoint soft keys, press MARKS:
➤ To place a waypoint at the cursor position or at the vessel position:
1. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft
key. The waypoint is added to the waypoint list and tagged using the next
available number.
The waypoint soft keys are displayed until you move the cursor away from
the waypoint or press CLEAR.
You can use the EDIT WAYPOINT soft key to name the the waypoint as
described in Editing Waypoints below.
3. Press CLEAR or ENTER to remove the place waypoint soft keys.
➤ To place a waypoint using the Waypoint List:
1. Press MARKS, followed by the WAYPOINT LIST soft key. The Waypoint List
and associated soft keys are displayed.
WAYPOINT LIST
POSITION
BRG _186°
BRG _21.0nm
---°
D4169-1
D4163-1
---
D4262-1
87