38
3. Use the trackpad to move the cursor to the required position.
4. Press ENTER to select the position and return to normal cursor control. The
chart is redrawn with the vessel position at the cursor.
Alternatively, you can press CLEAR to abandon the move and leave the
chart (and vessel) in its former position.
Using FIND SHIP
FIND SHIP has two functions, depending on your system configuration:
• In full-screen chart mode FIND SHIP is used to re-draw the chart with the
vessel at the centre and the cursor homed onto the vessel.
• On a combined radar/chartplotter display, with chart and radar half-screen
windows FIND SHIP can also be used to synchronise the radar and chart
images.
Centre the Vessel
When you press FIND SHIP the following occur:
• The chart is re-drawn with the vessel's position in the centre.
• The cursor is homed onto the vessel position and moves with it.
• When the vessel moves near the edge of the chart window, the chart is
redrawn to place the vessel and cursor at the centre again.
• Whilst homed, the status bar indicates vessel position, speed and course over
ground.
➤ To release the cursor from homed mode press the trackpad to move the cursor
away from the vessel's current position. The status bar shows the cursor
position, range and bearing.
HSB Series LCD Display
D4278-1
D4160-1