Raymarine RL70C Owner's Handbook Manual page 22

8
Default Display
Targets:
Landmass
Channel buoy
Surface
vessel
045°
0.28
Default soft key labels
These can be turned off; press any soft key to re-display them.
Different labels are displayed when you press a key.
Status Bar
Selected range, Range rings
in nautical miles (on/off)
3nm
Range ring interval
Not displayed if
range rings are off
Current heading
if heading data available,
or Course Over Ground.
Auto mode
Can be displayed in
Gain, Sea
degrees Magnetic or True
and/or Tune
126°T
Heading mode
Normally Head Up (H-UP),
but you can select
Course Up (C-UP) or
North Up (N-UP) if
you have heading data
HSB Series LCD Display
Status Bar
Range rings
The number and
spacing depend on
the current range, or
you can turn them off
Ship's Heading
Marker (SHM)
You can hide this
temporarily
Cursor position,
controlled by the
trackpad
Ship's position
You can move this
off-centre if required
Bearing scale,
each tick indicating
2 of azimuth
Cursor position box
Shows the current
cursor position as
either Range/Bearing
or Lat/Long. You can
move this box to your
preferred position
on the screen, or
turn it off.
Mode Indicators
displayed when function set on:
Target
Expansion
Wakes Guard Zone
Alarms
AUTO WKS EX GZ
GST FTC RC IR
Rain
Clutter
FTC Interference
(Remote rain)
Rejection
D3600-4
D3993-1