72
Note: When in chart mode, if you place a waypoint at the cursor position, it is not shown
on the display in Sonar mode.
If you place a waypoint at the boat position in Sonar mode it is shown in the chart
window.
Placing a Waypoint
➤
To access the place waypoint soft keys, press MARKS:
MARKS
➤
To place a waypoint at the cursor position or at the vessel position:
1. Press either the PLACE WPT AT CURSOR or the PLACE WPT AT VESSEL soft
key. The waypoint is added to the waypoint list and tagged using the next
available number.
The waypoint soft keys are displayed until you move the cursor away from the
waypoint or press CLEAR.
You can use the EDIT WAYPOINT soft key to name the waypoint as described
in Editing Waypoints below.
2. Press CLEAR or ENTER to remove the place waypoint soft keys.
DSM300 Operation with PLUS Series Displays
D5572-1
D4163-1